2N Indoor Compact - Holidays; Calling; Calls

Basic Settings
Profile name – enter a profile name. This parameter is optional and helps you find items in the profile list
more easily.
Profile Time Sheet
This block helps you set an active time profile within a week. A profile is active when the current time falls
into the set intervals.
If a day is marked as holiday (refer to Holidays (p. 32)), the last table row (Holiday) is applied regardless of
the day in a week.
NOTE
• You can set any count of time intervals per day: 8:00–12:00, 13:00–17:00, 18:00–20:00,
for example.
• To make a profile active the whole day, add an interval covering one whole day, i.e.
00:00–24:00
Holidays
Here select the bank holidays (including Sundays). You can assign them different time intervals than to
working days in their time profiles (refer to Time Profiles (p. 31)).
You can set holidays for the coming 10 years (click the year number at the top of the screen to select a
year). The screen displays a calendar for the whole year. A calendar is displayed for you to select/unselect
a holiday. Fixed (annual) holidays are marked green. Variable holidays (valid for the particular year only) are
blue. Click a date once to select a fixed holiday, click twice to select a variable holiday and click for the third
time to remove the holiday from the holiday list.
Calling
Calling is the basic function of 2N Indoor Compact – helps you establish connections with other IP network
terminal devices. The device supports the extended SIP.
Calls
General Settings
Call Time Limit – set the call time limit after which the call is automatically terminated. The device beeps 10
s before the call ends to signal that the call end is approaching. Enter any DTMF character into the call (# on
your IP phone, e.g.) to extend the call time. If the call time limit is set to 0 and SRTP is not used, the call is
not time limited.
Incoming Calls
Call Receiving Mode (SIP 1/2, SIP 2) – set the way of receiving incoming calls. You can set the call
receiving mode for each SIP account separately. The following three options are available:
• Always busy – the device rejects incoming calls.
• Manual Answering – the device rings to signal incoming calls and the user can press a button to pick up.
• Automatic – the device picks up incoming calls automatically.
Local Call Receiving Mode – set the way of receiving incoming local calls. The following three options are
available:
• Always busy – the device rejects incoming calls.
Software Configuration
32