Web Configuration Interface Login
1. Fill in the 2N Indoor Compact address or domain name into the internet browser.
The login screen is now displayed.
Should the login screen fail to appear, you must have typed a wrong IP address, port, domain name or
the administration web server has been switched off. If you do not have a certificate generated for the
IP address or domain name, an invalid security certificate warning may be displayed. In this case, you
need to confirm that you want to go to the web configuration interface.
2. Enter the login data.
The default login data are:
Username: Admin
Password: 2n
It is necessary to change the password immediately upon the first login.
After login using the default password, the access to the web configuration interface functions is limited.
TIP
It is recommended that a password is used that is difficult to break. It is not recommended
that names, places or things, especially those closely related to the user, are used in the
password.
For increased password security, it is recommended that:
• the random password generator is used,
• the password length is 12 characters at least,
• various characters from different character sets are combined (small/capital letters, digits,
special characters, etc.).
State
The Status menu provides clear status and other essential information on the device.
Device
The Device tab displays information on the model, its features, firmware and bootloader versions, etc.
Device Info
Factory Certificate Installed – specify the user certificate and private key to validate the intercom right to
communicate with the ACS.
Locate Device – optical and acoustic signaling of the device.
Optical signaling is only available if the device is equipped with backlight. If a speaker is not integrated in the
device, make sure than an external speaker is connected to the sound signaling connection.
Services
The Services tab displays the statuses of the network interface and selected services.
Call Log
The call log provides a list of all accomplished calls. Each call carries the following information:
• contact type,
• called/calling user ID,
• call date and time,
Software Configuration
27
To Next Page
Loading...
