Calls
In this state, connection or connection attempt is in progress with another device. The 2N Indoor Compact
functions are limited, it is impossible to switch to the home page and go to menus. Possible actions are
included in the table below.
A preview of the camera if available is shown on the display.
In this state, one of the following call types can be active in the device:
•
Outgoing call initiated by the 2N Indoor Compact answering unit.
•
Incoming trying to establish connection with the 2N Indoor Compact answering unit.
•
Active call – if connection between the devices is established, sound is transmitted and camera preview if
available is displayed.
Figure 3. Outgoing Call Figure 4. Incoming Call Figure 5. Active Call
Device Control
59
To Next Page
Loading...
