Possible ac-
tions
Performance Action result
Incoming call
receiving
Connection with the other device has been established, a call is in
progress.
End of Call
The outgoing call is cancelled./The incoming call is rejected./The
active call is interrupted.
Home screen (p. 53) is displayed.
End of call The active call is interrupted.
Target device
lock opening
A specifically configured unlock code is sent to the target device
and, if the code is compatible with the device, the target device lock
opens. If no unlock code is set, the default unlock code is sent to
the target device.
Door unlocking is signaled by a tone and green flash of the lock
button. After unlocking, automatic call ending can be set in the web
configuration interface Unlocking (p. 37).
Mute call
2N Indoor Compact does not transmit audio to the called device.
The microphone icons turns red.
“Noone can hear you” is displayed in the active call.
The microphone buttons is flashing yellow.
The action reperformance cancels muting.
Call volume
control
or
The call volume is increased/decreased by one level by each press
of or . When the scale end is reached, the button goes
off.
The volume level is automatically written to the settings.
The ringtone stops playing. The incoming call is not ended.
Device Control
60
To Next Page
Loading...
