TLS Authentication
Authentication enabled – enable network device authentication via the 802.1x EAP-MD5 protocol. If the
network does not support 802.1x, the intercom will become unavailable.
Trusted Certificate – specify the set of trusted certificates for verification of the RADIUS server public
certificate validity. Choose one of three certificate sets, see
Certificates (p. 45). If no trusted certificate is
included, the RADIUS public certificate is not verified.
Client certificate – specify the user certificate and private key for verification of the intercom authorization
to communicate via the 802.1x-secured network element port in the LAN. There are three sets of user
certificates and private keys, refer to the Certificates subsection, see Certificates (p. 45).
PEAP MSCHAPv2 authentication
Authentication Allowed – enable authentication of network devices via the 802.1x PEAP MSCHAPv2
protocol. If the network does not support 802.1x, the intercom will become unavailable.
Trusted Certificate – specify the set of trusted certificates for verification of the RADIUS server public
certificate validity. Choose one of three certificate sets, see Certificates (p. 45). If no trusted certificate is
included, the RADIUS public certificate is not verified.
Password – enter the access password for PEAP-MSCHAPv2 authentication.
Date and Time
2N Indoor Compact is equipped with a real time clock without power outage backup. Select
Use Time from Internet (p. 0 ) to synchronize the device time with the Internet time or click Synchronize
with Browser to synchronize time with your current PC time.
CAUTION
It is recommended that the Use time from Internet (p. 0 ) function is enabled for a maxi-
mum accuracy and reliability. The device time error can be up to ±2 minutes per month
under normal operation conditions.
NOTE
The device does not need the current date and time values for its basic function. The
current date and time values are necessary for a proper function of the time profiles and
correct event times in some lists (Syslog, entered cards, log downloaded via HTTP API,
etc.).
Current Time
Use time from Internet – Enable the NTP server use for device time synchronization.
Synchronize with Browser – click the button to synchronize the device time with your current PC time value.
Time zone
Automatic Detection – define whether the time zone shall be detected automatically from My2N. In case
automatic detection is disabled, the Manual selection parameter is Used (manually selected time zone or
Own rule).
Detected Time Zone Display – the automatically found time zone. In case the function is unavailable or
disabled, N/A is displayed.
Software Configuration
44
To Next Page
Loading...
