Configuration
Restore Configuration – restore configuration from a previous backup. Press the button to display a dialog
box to select a configuration file and upload it to the device. Before uploading choose whether or not the LAN
settings and SIP PBX connection settings are to be applied.
CAUTION
The login password is saved in the configuration file. If the password is not encoded in
the file or 2n is the default password, the valid configuration part will only be uploaded.
This means that the configuration is uploaded, but the password remains the same, not
assuming the value given in the file.
Backup Configuration – back up the complete current device configuration. Press the button to download
the complete configuration into a storage.
CAUTION
As the device configuration may include delicate information, such as user phone numbers
and access passwords, handle the file cautiously.
Reset Configuration – reset all the device parameters except for the LAN parameters. To reset the device
completely, use the appropriate jumper or press Reset.
System
Upgrade Firmware – upload a new firmware version to the device. Press the button to display a dialog
box and select the proper firmware file. Once the firmware is uploaded successfully, the device is restarted
automatically. After restart, the device becomes fully operational with a new firmware version. The whole
upgrading process takes less than one minute. Download the current firmware version for your device from
2N.com. The FW upgrade does not affect configuration. The device checks the firmware file and prevents
you from uploading an incorrect or corrupt file.
Firmware State – display whether a new firmware version is available. If not, Check is displayed for you
to verify online if a new firmware version is available. If so, press Update to download the firmware and
upgrade the device automatically.
Notify of Beta Versions – enable monitoring and downloading of the latest firmware beta version.
Restart – restart the device. The process takes about 30 s. Once restart is completed and the device is
assigned its IP address, the login window will be displayed automatically.
Third Party Library Licenses – click Show to open a dialog box including a list of used licenses and third
party libraries. It also includes a EULA link.
Usage Statistics
Send anonymous statistics data – enable sending of anonymous statistic data on device usage to the
manufacturer. No such delicate information as passwords, access codes or phone numbers are included.
This information helps 2N TELEKOMUNIKACE a.s. improve the software quality, reliability and performance.
You can participate in this voluntarily and cancel your statistic data deliveries any time.
Software Configuration
49
To Next Page
Loading...
