393D SYSTEMS, INC.
Step 7 : Lens cleaning
Caution: to ensure process quality, it is important to clean the lens before each job. Consult the section
"Cleaning the laser optic system" on page 62 for details on how to clean the lens.
If no lter replacement required
1. Perform the actions (1). Consult the section
"Cleaning the laser optic system" on page 62
for details on how to clean the lens.
2. Click on Next (2) to go to the next step.
If lter replacement required
1. When the lens cleaner timer value has reached
60 days, the interface will at rst prompt to
change the lens cleaner lter. Perform the actions
(1). Consult the Maintenance section for details
on how to replace the lter).
1
2
1
To Next Page
Loading...
Need help?
General
