20 | 3DGence INDUSTRY F340
1.2. Kinematic system
The printer works by using Cartesian robot kinematics. The axes described as X and Y move the hotend in horizontal plane,
while Z axis moves the bed in vertical axis. The dimensions of device working space:
X: 260 mm
Y: 340 mm
Z: 340 mm
The printed object cannot exceed those dimensions. The printer software will disable any attempt to generate a le ex-
ceeding the maximum dimensions, however it should be taken into account when designing a printing model.
Fig. 16. Marking of printer axes.
1.3. Printing bed
The entire movable printing bed is marked with a brighter color. Darker color represents the actual printing space. A
heatbed provides a good print adhesion even when the device is operated for dozens of hours with no breaks. The actual
printing bed is installed on a movable mount making it possible to extend it for easier model handling once the printing
is completed.
CAUTION:
Perform all the operations related to print removal, table extension and its re-locking wearing protective
gloves and only when the device is cooled down completely!
Z axis
X axis
Y axis
To Next Page
Loading...
