3DGence INDUSTRY F340 - V SOFTWARE; 1. Introduction; 1.1. Quality Guarantee; 2. Installation

56 | 3DGence INDUSTRY F340
Dedicated 3DGence Slicer software with a pre-dened print proles for specic materials was prepared for 3DGence
printers. This software is designed for preparing machine codes, i.e. gcode, based on CAD les in STL and OBJ format.
The producer provides comprehensive support when using pre-set printing proles in the software and recommended
printing materials.
Expert users may modify the advanced print settings. Due to the nature of such modications, the producer does not
guarantee the quality and repeatability of printouts prepared in this way.
The producer guarantees the highest possible quality of models produced with the dedicated software and materials.
If the user detects any defects in the produced models or software errors when using the software, please contact us by
e-mail and attach a photo/screenshot and description of the defect and, if possible, a .gcode and .stl le. Every model
submitted to the manufacturer in this way will be assessed and/or printed in the company’s headquarters. The produc-
er will suggest a solution, advice, initiate maintenance activities (if required), prepare .gcode executable le or update
printing proles accordingly.
The software should be downloaded from the producer’s website. The recommended hardware requirements to initialize
the software are as follows:
• Windows 7 or later,
• screen resolution 1920x1080 pixels,
• 4 GB RAM,
• dual-core Intel Core i3 or later.
The software may be initialized on hardware not meeting the above requirements but this may signicantly compromise
the comfort of work and model processing speed. The producer does not provide support for any hardware not meeting
the above system requirements, especially for older operating system versions.
During the rst start-up of the software the user will be asked for consent for automatic updates of print proles. We
recommended selecting that option to achieve the highest possible model quality. This option may be enabled or disabled
any time. The updates take place during every software start. Proles may also be updated manually.
1.1 Quality guarantee
V SOFTWARE
1. INTRODUCTION
2. INSTALLATION