3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User’s Guide 5.6.1 Settings
Figure 79 – Messenger Setup window
In the Messenger Setup window the following parameters can be set:
• Message Type – E-mail
• Host Address
• Port
• E-mail
• Authentication – User ID and User password are required.
• Secure Connection (SSL) – If activated, the messages will be sent through secured
connection.
• If you have properly set messenger settings, click Save.
• Click Add new user in the Message Call section of the External application call
settings window then enter Display name and Address of the recipient. Select
message functions under the Send Message if: field for the selected recipients
(from the drop-down list at the top of the section).
• Click Delete user if you want to remove a user from the list after selection.
• – Report sender settings
Add new recipients to the list by clicking + or remove selected from the list by clicking -. To
send an example mail to the selected recipient, click . Open E-mail settings window to
modify recipient data by clicking .
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 120(156)

3DHISTECH Pannoramic SCAN II Specifications

General

Brand	3DHISTECH
Model	Pannoramic SCAN II
Category	Scanner
Language	English