3M Dynatel 2250M - Self Test Of Receiver; Product Description And Optional Accessories; Product Description

78-8130-6150-0-F 57
• Programoneormultiplereceiverstobestsuitspecificuserconfigurations
• Loadanalternatelanguageintothereceiver
• Utilizethe3M
™
iDMarkerutilityto:
− CreatetemplatesforwritingdatatoiDmarkers,orcreateTraceTemplatesfor
GPSpathtracingwhenconnectedtoaGPSdevice.
− DownloadiDmarkerdatathathasbeenwrittenorreadbythereceiverfor
documentationdatabases.
Embeddedinthedesktopsoftwareisthemostcurrentsoftwareforthereceiver,which
affordstheusertheoptionofupgradingtheunitwithoutreturningtheunittothe
3MServiceandRepairCenter.
Pleaserefertotheoperatinginstructionsincludedwiththesoftware.
22. Self Test Of Receiver
Menu [6] + >>More [SK:4] + Self Test [SK:7]
Thisoperationperformsaself-testonthereceiver.
Thereceiverwilldisplaycurrentinformationabouttheunit(modelnumber,serial
number,softwarerevision,andhardwarerevision).
1. PressRun [SK]tostarttheselftest.
− Astatusbarwillappearwhiletheselftestisrunning.
− Resultswillappearonthedisplaywhenthetestiscomplete.
− PressExit[SK]toreturntotheMenu.
23. Product Description And Optional Accessories
A. Product Description
T= Transmitter
R=Receiver
Transmitter Output Power: 3W=3 Watt. 5W=5 Watt, 12W=12 Watt
Direct Connect Cable Clip Size: For 3 Watt and 5 Watt Transmitters only:
C= Communication Clip only; U=Utility Clip only;
For 12 Watt Transmitters only: CU=Communication and Utility Clips; W=Utility Clip only
U=US Version; E=Export Version
iD=Locates electronic markers, including read/write iD Marker capability
2250M=Cable/Pipe Locator; 2273M=Cable/Pipe/Fault Locator
2250M
2273M
Example: 2273M-iD/UCU12W-RT
Description:2273MCable/Pipe/FaultLocator/iDcapability;U.S.version;
CommunicationandUtilitydirectconnectcables(clips);12-WattTransmitter;Receiver
andTransmitterincluded.