EasyManuals Logo

3M Dynatel 2250M User Manual

3M Dynatel 2250M
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
78-8130-6150-0-F 63
26. Environmental and Regulatory Specifications
Item Specification
Standard IP54
Regulatory FCC compliant, FCC Part 15
Operating Temperature -4°F to 122°F (-20°C to 50°C)
Storage Temperature -4°F to 158° F (-20°C to 70°C)
27. Rechargeable Battery Information
UN2800classicationas“Batteries,wet,Non-Spillable,andelectricstorage”
asaresultofpassingtheVibrationandPressureDifferentialTestdescribedin
DOT[49CFR173.159(d)andIATA/ICAO[SpecialProvisionA67].
m CAUTION
To reduce the risks associated with environmental contamination and possible injury:
The 12W transmitter utilizes the 2200RB rechargeable battery for the Maximum Output Power
level. This is a maintenance-free sealed lead (Pb)-acid battery.
Replace the battery if the acid solution leaks.
The batteries are not serviceable.
Do not disassemble batteries.
Do not remove vent caps.
Do not rest tools or cables on batteries.
Store lead-acid batteries with adequate ventilation.
Do not heat batteries above 140°F (60°C)
Never recharge batteries in an unventilated, enclosed space.
Spent batteries must be treated as hazardous waste. Dispose of batteries and electronic
components in accordance with all regulations.
Do not incinerate batteries.
Always remove/disconnect batteries when not in use or storing for long periods of time.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3M Dynatel 2250M and is the answer not in the manual?

3M Dynatel 2250M Specifications

General IconGeneral
Brand3M
ModelDynatel 2250M
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals