ABB ACS880-14 - Attaching the External Control Unit to a Mounting Plate or Wall; Attaching the External Control Unit Vertically on a DIN Rail

￭ Attaching the external control unit to a mounting plate or wall
1. Attach the mounting screws in the wall.
2. Lift the control unit onto the screws and tighten the screws.
3AUA0000130997
1
2
￭ Attaching the external control unit vertically on a DIN rail
1. Attach the latch (A) to the back of the control unit with three screws.
2. Click the control unit to the rail as shown below (B).
A
3AUA0000130997
A
B
B
110 Electrical installation