Examining the delivery
Make sure that all items listed in Moving and unpacking (page 65) are present.
Make sure that there are no signs of damage. Before attempting installation and operation,
examine the information on the type designation label of the drive to verify that the unit is
of the correct type.
Lifting
Lift the drive module only by the lifting lugs.
Attaching the drive module and LCL filter module to a
mounting plate or wall
Attach the LCL filter module and the drive module to wall or a mounting plate at the points
shown below.
You can attach the modules to Rittal VX25 enclosure with the mounting brackets delivered
with the drive, see Step-by-step drawings for an installation example of standard drive
configuration in Rittal VX25 800 mm wide enclosure (page 233).
72 Mechanical installation
To Next Page
Loading...
