ABB ACS880-14 - High Speed Mode

High speed mode
The selection High speed mode of parameter 95.15 Special HW settings improves control
performance at high output frequencies. ABB recommends it to be selected with output
frequency of 120 Hz and above.
This table gives the drive module ratings for 120 Hz output frequency and the maximum
output frequency for the drive ratings when High speed mode in parameter 95.15 Special
HW settings is enabled: With output frequencies smaller than this recommended maximum
output frequency, the current derating is less than the values given in the table. Contact
ABB for operation above the recommended maximum output frequency or for the output
current derating with output frequencies above 120 Hz and below the maximum output
frequency.
Deratings with selection High speed mode of parameter 95.15 Special HW settings
ACS880-
14-
Maximum output frequency120 Hz output frequency
Heavy-
duty
use
Light-
duty
use
Nominal use
Maxim-
um fre-
quency
Heavy-
duty
use
Light-
duty
use
Nominal use
Fre-
quency
I
Hd
I
Ld
P
n
I
n
f
max
I
Hd
I
Ld
P
n
I
n
f
AAkWAHzAAkWAHz
U
n
= 400 V
170193110201500206234132246120246A-3
203229132240500246278160293120293A-3
241284200297500293345200363120363A-3
299346250362500363420250442120442A-3
299395250413500363480250505120505A-3
364458315479500442556315585120582A-3
416509315532500505618355650120650A-3
U
n
= 460 V
214249200 (hp)247500260302250 (hp)302120302A-5
U
n
= 500 V
148188132196500180228132240120240A-5
198203160213500240247160260120260A-5
214283250295500260343200361120361A-5
297324250339500361393250414120414A-5
341371315376500414450315460120460A-5
379405315412500460492355503120503A-5
U
n
= 690 V
68787582500119135132142120142A-7
8295110100500142165160174120174A-7
100115132121500174200200210120210A-7
121148160156500210257250271120271A-7
156184200190500271320315330120330A-7
190207250213500330360355370120370A-7
213241250247500370420400430120430A-7
3AXD00000588487
184 Technical data