￭ Control panel
In the standard drive module configuration, the control panel is located in the control panel
holder of the external control unit.
One control panel can also be used to control several drives through a panel link; see section
Panel bus (Control of several units from one control panel) (page 113).
For the use of the control panel, see the firmware manual or ACx-AP-x Assistant control
panels user’s manual (3AUA0000085685 [English]).
For the control panel mounting platforms, see Mounting the control panel on the cabinet
door (page 53).
ACS-AP-I Assistant control panel (option +J425)1
ACS-AP-W Assistant control panel with bluetooth2
Operation principle and hardware description 39
To Next Page
Loading...
