Installation example with full cabling
panels (option +H381)
Contents of this chapter
In this chapter, the drive module and LCL filter module are installed in a 800 mm wide Rittal
VX25 enclosure in a bookshelf way. The modules are placed in an upright position on the
enclosure bottom with the front facing the enclosure door. Space for the additional
components can be made by connecting two or more VX25 enclosures together. Available
alternative ABB parts are also given.
Limitation of liability
The installation must always be designed and made according to applicable local laws and
regulations. ABB does not assume any liability whatsoever for any installation which breaches
the local laws and/or other regulations. Furthermore, if the recommendations given by ABB
are not followed, the drive may experience problems that the warranty does not cover.
Safety
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur. If you are not a qualified electrical
professional, do not do installation or maintenance work.
11
Installation example with full cabling panels (option +H381) 139
To Next Page
Loading...
