ABB ACS880-14 - Installing the Air Baffles

Install the L2/V1 connection terminal to the insulators. See the warning in step 5.8
Connect the L2/V1 conductors to the L2/V1 connection terminal.9
Install the L3/W1 connection terminal to the insulators. See the warning in step 5.10
Connect the L3/W1 conductors to the L3/W1 connection terminal.11
Install the side clear plastic shroud and the upper front cover of the drive module.12
Install the entry clear plastic shroud. and motor cable shroud .13
Install the top clear plastic shroud to the drive module.14
Installing the air baffles
See:
•
Step-by-step drawings for an installation example of standard drive configuration in Rittal
VX25 800 mm wide enclosure (page 233)
•
Air baffles (page 210)
•
Air baffles for option +H381 in 800 mm wide Rittal VX25 enclosure (page 211)
136 Installation example of the standard drive module configuration in Rittal VX25 enclosure