ABB ACS880-14 - Removing the Protective Covering from the Drive Module and LCL Filter Module Air Outlet

Removing the protective covering from the drive module
and LCL filter module air outlet
WARNING!
Remove the protective covering from the top of the drive module after the
installation. If the covering is not removed, the cooling air cannot flow freely through
the module and the drive will run to overtemperature.
WARNING!
Remove the protective covering from the top of the LCL filter module after the
installation. If the covering is not removed, the cooling air cannot flow freely through
the module and the drive will run to overtemperature.
138 Installation example of the standard drive module configuration in Rittal VX25 enclosure