Cabinet placement on a cable channel
Note the following when you plan to place the cabinet on a cable channel:
• The cabinet structure must be sturdy enough. If the whole cabinet base is not supported
from below, the cabinet weight will lie on the sections that the floor carries.
• Equip the cabinet with a sealed bottom plate and cable entries to ensure the degree of
protection and to prevent the cooling air flow from the cable channel into the cabinet.
Cabinet side view with a bottom plateThe supporting structure on a cable channel
Heaters
Use a heater if there is a risk of condensation in the cabinet. Although the primary function
of the heater is to keep the air dry, it may also be required for heating at low temperatures.
52 Generic cabinet planning instructions
To Next Page
Loading...
