ABB CRB 1300 - Page 10

References
Documentation referred to in the manual, is listed in the table below.
Document IDDocument name
3HAC083112-001Product manual, spare parts - CRB 1300
3HAC083113-001Product specification - CRB 1300
3HAC031045-001Safety manual for robot - Manipulator and IRC5 or OmniCore con-
troller
i
3HAC060860-001Product manual - OmniCore C30
3HAC073706-001Product manual - OmniCore C90XT
3HAC065036-001Operating manual - OmniCore
3HAC066554-001Application manual - Controller software OmniCore
3HAC030421-001Application manual - CalibWare Field
3HAC066553-001Technical reference manual - Event logs for RobotWare 7
3HAC042927-001Technical reference manual - Lubrication in gearboxes
3HAC065041-001Technical reference manual - System parameters
3HAC066558-001Application manual - PROFINET Controller/Device
3HAC066559-001Application manual - Functional safety and SafeMove
3HAC032104-001Operating manual - RobotStudio
3HAC080868-003Circuit diagram - CRB 1300
-Operating instructions microScan3 - PROFINET
-Operating instructions microScan3 - Pro I/O
i
This manual contains all safety instructions from the product manuals for the manipulators and the
controllers.
Revisions
DescriptionRevision
First edition.A
Published in release 23A. The following updates are done in this revision:
• Added the direct connection between the laser scanner and Om-
niCore controller.
B
10 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
Overview of this manual
Continued