ABB CRB 1300 - Replacing the Axis-3 Mechanical Stops

5.5.4 Replacing the axis-3 mechanical stops
Location of the mechanical stops
The mechanical stops are located as shown in the figure.
CRB 1300-10/1.15CRB 1300-11/0.9, CRB 1300-7/1.4
xx2200001139xx2200001136
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Replace if damaged.3HAC065651-001Mechanical stop, block A
Used for axis 3 of CRB 1300-
10/1.15.
Replace if damaged.
3HAC065671-001Mechanical stop, block B
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 716.
-Standard toolkit
Required consumables
NoteArticle numberConsumable
Loctite 2400 (or equivalent Loctite
243)
-Locking liquid
Continues on next page
478 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.4 Replacing the axis-3 mechanical stops