ABB CRB 1300 - Replacing the Axis-2 Gearbox

5.7.2 Replacing the axis-2 gearbox
Location of the axis-2 gearbox
The axis-2 gearbox is located as shown in the figure.
xx2000001487
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC064977-001Gear unit, axis 2
3HAC064977-004O-ring on axis-2 gear unit
3HAC073078-001Motor unit, axis 2
3HAC061327-037O-ring on motor unit
3HAC085071-001Process hub with lamp unit (CP/CS
and air hose, with Ethernet)
3HAC081993-004Multi-color lamp unit (16 mm)
3HAC082320-001Lamp unit cover
Used with protection class IP67.
Replace if damaged.
3HAC082935-001Gasket for lamp unit cover
Continues on next page
558 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.7.2 Replacing the axis-2 gearbox