3.3.1.2 Lifting and rotating a suspended mounted manipulator
Introduction
How to lift and turn the robot to a suspended position using the turning accessory
is described in the lifting instruction delivered with the lifting accessory. Article
numbers for the accessory and the instruction is specified in Special tools on
page 717. Any additional equipment required is specified in the instruction for the
lifting accessory. Contact ABB for more information.
How to lift and turn the robot into position for wall position: Contact ABB for more
information.
Continues on next page
Product manual - CRB 1300 63
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.3.1.2 Lifting and rotating a suspended mounted manipulator
To Next Page
Loading...
