ABB CRB 1300 - Replacing the Axis-5 Motor

5.6.5 Replacing the axis-5 motor
Location of the axis-5 motor
The axis-5 motor is located as shown in the figure.
xx2000001485
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC073088-001Motor unit, axis 5 and axis 6
3HAC065794-001Timing belt, axis 5
3HAC085071-001Process hub with lamp unit (CP/CS
and air hose, with Ethernet)
3HAC081993-004Multi-color lamp unit (16 mm)
3HAC082320-001Lamp unit cover
Used with protection class IP67.
Replace if damaged.
3HAC082935-001Gasket for lamp unit cover
3HAC073094-001Tubular cover
Used with protection class IP67.
Replace if damaged.
3HAC070887-001Gasket for process hub
Used with protection class IP67.
Replace if damaged.
3HAC067834-001Gasket for tubular cover
Continues on next page
528 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.6.5 Replacing the axis-5 motor