ABB CRB 1300 - Gearboxes; Replacing the Axis-1 Gearbox

5.7 Gearboxes
5.7.1 Replacing the axis-1 gearbox
Location of the axis-1 gearbox
The axis-1 gearbox is located as shown in the figure.
xx2000001486
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC063187-001Gear unit, axis 1
3HAC063187-007O-ring on axis-1 gear unit
3HAC073039-001Motor unit, axis 1
3HAC061327-037O-ring on motor unit
3HAC066433-001Radial sealing
3HAC070148-002Radial sealing
3HAC067626-001Gasket on swing
Replace if damaged.3HAC064478-001Mechanical stop, axis 1, fixed block
Continues on next page
554 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.7.1 Replacing the axis-1 gearbox