2.3 Safety data
Prevailing standards and directives
For the use of industrial robots, regulations must be fulfilled as described in the
following standards and directives:
• EN ISO 10218-1:2011
Risk assessment
The results of a risk assessment performed on the robot and its intended application
may determine that a safety-related control system performance other than that
stated in ISO 10218 is warranted for the application.
Safety functions and safety related data
Safety functions and safety related data for CRB 1300 rely on the controller and
safety laser scanners.
Safety data for the controller is detailed in the product manual of the robot controller,
see References on page 10.
Safety data for the safety laser scanners is detailed in the user manual from the
vendor, see Operating instructions microScan3 - PROFINET and Operating
instructions microScan3 - Pro I/O that are available on SICK® website.
40 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
2 Manipulator description
2.3 Safety data
To Next Page
Loading...
