ABB CRB 1300 - Inspecting the Oil Level in Axis-2 Gearbox

4.4.5 Inspecting the oil level in axis-2 gearbox
Location of the oil level plug
The oil plug through which the oil level is inspected is located as shown in the
figure.
xx2000001512
Oil plug, filling and ventingA
Oil plug, filling, draining and ventingB
Tightening torque: 10 Nm
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 716.
-Standard toolkit
Required consumables
NoteArticle numberConsumables
Information about the oil is found in
Technical reference manual - Lubrica-
tion in gearboxes.
-Lubricating oil
Required documents
Document numberDocument name
3HAC042927-001Technical reference manual - Lubrication in gearboxes
Continues on next page
Product manual - CRB 1300 181
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
4 Maintenance
4.4.5 Inspecting the oil level in axis-2 gearbox