EasyManua.ls Logo

ABB CRB 1300 - Extra O-Rings

ABB CRB 1300
726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.2.3 Extra O-rings
Installation of extra O-rings
For robots with protection class IP67 (option 3350-670)
An extra O-ring is delivered together with the robot and must be fitted to the robot
during installation.
NoteArticle numberEquipment
Used with protection class IP67.3HAB3772-19O-ring
Used to seal between the main
power cable and connector.
Robots with manipulator cables
routed from the rear of the base:
xx2000002338
Robots with manipulator cables
routed from below (3309-1):
xx2000002339
Further information
For installation information, see On-site installation on page 58 and Electrical
connections on page 98.
Product manual - CRB 1300 55
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.2.3 Extra O-rings

Table of Contents

Related product manuals