ABB CRB 1300 - Motors; Replacing the Axis-1 Motor

5.6 Motors
5.6.1 Replacing the axis-1 motor
Location of the axis-1 motor
The axis-1 motor is located as shown in the figure.
xx2000001480
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC073039-001Motor unit, axis 1
3HAC061327-037O-ring on motor unit
Used with CRB 1300-11/0.9.3HAC073305-001Main cable harness, S (CP/CS and
air hose, with Ethernet)
Used with CRB 1300-10/1.15.3HAC073302-001Main cable harness, M (CP/CS and
air hose, with Ethernet)
Used with CRB 1300-7/1.4.3HAC073299-001Main cable harness, L (CP/CS and
air hose, with Ethernet)
3HAC085071-001Process hub with lamp unit (CP/CS
and air hose, with Ethernet)
Continues on next page
Product manual - CRB 1300 483
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.6.1 Replacing the axis-1 motor