ABB CRB 1300 - Replacing the Brake Release Unit

5.3.3 Replacing the brake release unit
Location of the brake release unit
The brake release unit is located as shown in the figure.
xx2200001133
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC073296-001Brake release unit
Used with protection class IP67.
Replace if damaged.
3HAC070274-001Gasket for brake release unit
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 716.
-Standard toolkit
Continues on next page
Product manual - CRB 1300 255
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.3.3 Replacing the brake release unit