3.3 On-site installation
3.3.1 Lifting the robot
3.3.1.1 Lifting the robot with roundslings
Illustration - attaching the roundslings
Note
A transportation bracket is installed and delivered together with the robot for
securing the robot position during shipping and transport. The transportation
bracket must be removed before fitting the lifting accessory to the robot during
the lifting of the robot to the installation site.
For details, see Transportation bracket on page 56.
CRB 1300-7/1.4CRB 1300-10/1.15CRB 1300-11/0.9
xx2200000983
xx2200000982
xx2200000981
DANGER
Attempting to lift a robot in any other position than the recommended lifting
position may result in the robot tipping over, causing severe damage or injury.
Continues on next page
58 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.3.1.1 Lifting the robot with roundslings
To Next Page
Loading...
