ABB CRB 1300 - Swing and Base; Replacing the Base

5.4 Swing and base
5.4.1 Replacing the base
Location of the base
The base is located as shown in the figure.
xx2000001473
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC073029-001Base
3HAC063187-001Gear unit, axis 1
3HAC063187-007O-ring on axis-1 gear unit
3HAC073039-001Motor unit, axis 1
3HAC061327-037O-ring on motor unit
3HAC066433-001Radial sealing
3HAC070148-002Radial sealing
3HAC074630-001Quick coupling
Continues on next page
260 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base