ABB CRB 1300 - Page 186

Bottom connector interfaceRear connector interfaceRobot type
xx2000001257
xx2000001256
CRB 1300-
7/1.4 and
Required tools and equipment
NoteEquipment
The content is defined in the section Stand-
ard toolkit on page 716.
Standard toolkit
Other tools and procedures may be required
if the spare part needs to be replaced. These
are specified in the replacement procedure.
Required consumables
NoteArticle numberConsumable
FM 2223HAC029132-001Grease
Lubricating the cable package
Use this procedure to lubricate the cable package.
InformationAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
1
Gain access to the cable package by remov-
ing the covers.
2
Continues on next page
186 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
4 Maintenance
4.5.1 Lubricating the cable package
Continued