ABB CRB 1300 - Page 252

NoteAction
xx2000001506
Remove the battery pack by cutting the cable
strap.
4
Removing the SMB unit
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section The
unit is sensitive to ESD on page 49.
2
xx2000001507
Remove the screws.3
Refitting the SMB unit
Use these procedures to refit the SMB unit.
Refitting the SMB unit
NoteAction
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section The
unit is sensitive to ESD on page 49.
1
Continues on next page
252 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.3.2 Replacing the SMB unit
Continued