ABB CRB 1300 - Page 294

NoteAction
xx2000001553
Remove the cable bracket from the lower arm first
and then from the cable package.
2
xx2100001465
xx2000001554
Remove the connector plate.3
Separating the cable package from the swing
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
xx2000001556
Remove the axis-2 cable protector.2
Continues on next page
294 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued