ABB CRB 1300 - Page 349

NoteAction
Magnetic oil plug, G 1/4":
3HAC037925-001
Check the oil plugs.
Replace if damaged.
2
Tightening torque: 10 Nm
xx2000001726
Refitting the axis-2 gearbox
NoteAction
O-ring on axis-2 gear unit:
3HAC064977-004
Check the O-ring.
Replace if damaged.
1
xx2000001690
Guide pin for axis-2 gearbox. In-
cluded in special toolkit
3HAC076396-001.
Fit guide pins to the axis-2 gearbox.
Note
Always use two guide pins together.
2
xx2000001705
xx2000001706
Refit the axis-2 gearbox, with guidance from the
guide pins.
3
Continues on next page
Product manual - CRB 1300 349
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the lower arm
Continued