ABB CRB 1300 - Page 351

NoteAction
Sealing ring, swing side:
3HAC065675-001
For robots with protection class IP67 (option
3350-670)
2
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (8 pcs)
Refit the sealing ring on the swing side.
Tightening torque: 3.8 Nm
xx2000002516
Sealing ring, swing support side:
3HAC065676-001
Refit the sealing ring on the swing support side.3
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (16 pcs)
Tightening torque: 3.8 Nm
xx2000001692
Check the radial sealing on the swing top
Note
This procedure is valid for robots with:
• protection class IP67 (option 3350-670)
NoteAction
xx2000002460
Check the radial sealing on the swing top.
Replace if damaged, as described below.
1
Continues on next page
Product manual - CRB 1300 351
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the lower arm
Continued