ABB CRB 1300 - Page 379

The extender unit (only for CRB 1300-7/1.4 and ) is located as shown in the figure.
xx2000001477
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Used with protection class IP40.3HAC073079-001Housing
Used with protection class IP67.3HAC077801-001Housing, IP67
Used for CRB 1300-7/1.4.3HAC073085-001Extender unit
3HAC073076-001Lower arm support
3HAC073084-001Gear unit, axis 4
Used with protection class IP67.
Replace if damaged.
3HAC061327-021O-ring on circular spline side, axis
4
Used with protection class IP67.
Replace if damaged.
3HAC061327-017O-ring on flexible spline side, axis
4
3HAC073087-001Motor unit, axis 4
3HAC065806-001Timing belt, axis 4
Replace if damaged.3HAC065805-001Mechanical stop, axis 4, flange
Replace if damaged.3HAC065804-001Mechanical stop, axis 4, slider
Continues on next page
Product manual - CRB 1300 379
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the housing and extender unit
Continued