ABB CRB 1300 - Page 435

NoteAction
xx2000001670
Remove the timing belt.7
Separating the housing
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
xx2000001729
Support the weight of the tubular and tilt unit, and
remove the screws.
2
xx2000001734
Separate the tubular from the housing.3
Removing the axis-4 mechanical stop flange
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
Continues on next page
Product manual - CRB 1300 435
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued