NoteAction
xx2000001596
Remove the screws and washers.3
xx2000001597
Carefully lift out the motor.4
Removing the axis-6 timing belt
NoteAction
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
CAUTION
Loosening timing belts will release axes. This
means the axes can fall down.
Make sure axes are well supported before
loosening timing belts.
2
xx2000001599
Loosen the screws and move the motor slightly
to slacken the timing belt.
3
Continues on next page
Product manual - CRB 1300 445
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued
To Next Page
Loading...
