ABB CRB 1300 - Page 584

Refitting the swing support
NoteAction
Sealing ring, swing support side:
3HAC065676-001
Check the sealing ring.
Replace if damaged.
1
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (16 pcs)
Tightening torque: 3.8 Nm
xx2000001692
O-ring on lower arm: 3HAC061327-
015
For robots with protection class IP67 (option
3350-670)
2
xx2000002518
Check the O-ring.
Replace if damaged.
Gasket for swing support, short:
3HAC067822-001
For robots with protection class IP67 (option
3350-670)
3
Gasket for swing support, long:
3HAC067823-001
Check the gasket.
Replace if damaged.
xx2000002520
Continues on next page
584 Product manual - CRB 1300
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.7.2 Replacing the axis-2 gearbox
Continued