ABB CRB 1300 - Page 645

NoteAction
xx2000001676
Refit the axis-4 gearbox.2
xx2000001720
Make sure that the screws on the gearbox are
properly fitted into the notches on the extender
unit/tubular.
3
Valid for CRB 1300-11/0.9 and
CRB 1300-10/1.15
xx2000001719
Valid for CRB 1300-7/1.4 and
xx2000001679
Continues on next page
Product manual - CRB 1300 645
3HAC083111-001 Revision: B
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.7.4 Replacing the axis-4 gearbox
Continued