ABB FSM4000 - Page 90

90 FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E
… 8 Operation
… Parameter descriptions
Submenu / parameter Value range Remark
Submenu
Set the time-out limits and alarm behavior for values over or
under the signal-to-noise ratio.
Alarm SNR
Min. value
0 ... 100
Lower range limit for alarm.
0.0 %
Max. value
0 ... 100
Upper range limit for alarm.
100.0 %
Message
Off, warning, error
Defines the alarm behavior.
Off
Submenu
Set the time-out limits and alarm behavior for values over or
under the DAC value. The DAC value is a criterion for the
amount of coil current.
Alarm DAC Value
Min. value
0 ... 1024
Lower range limit for alarm.
16
Max. value
0 ... 1024
Upper range limit for alarm.
700
Message
Off, warning, error
Defines the alarm behavior.
Off