ABB FSO-21 - Page 402

402 Parameters
Index Name/Value Description Factory
default
Safety
General drive safety parameters
200.11 FS module type Module type indicator of the FSO module FSO-21
200.12 FS hardware
version
FSO module hardware version indicator Shows the
current HW
version
200.13 FS firmware version FSO module firmware version indicator Shows the
current FW
version
200.16 FSE module type Module type indicator of the FSE module in
use
FSE-31
200.17 FSE hardware
version
FSE module hardware version indicator Shows the
current HW
version
200.18 FSE firmware
version
FSE module firmware version indicator Shows the
current FW
version
200.21 SLS1 activity and
version
Activates or deactivates the SLS1 function
and shows the version of the SLS1 function.
Disabled
Disabled Deactivates the SLS1 function.
Version 1 Activates version 1 of the SLS1 function.
200.22 SLS1 limit negative Sets the SLS1 negative speed limit for the
drive
0.0 rpm
-35880.0 …0.0 rpm Speed
200.23 SLS1 limit positive Sets the SLS1 positive speed limit for the
drive
0.0 rpm
0.0…35880.0 rpm Speed
200.31 SLS2 activity and
version
Activates or deactivates the SLS2 function
and shows the version of the SLS2 function.
Disabled
Disabled Deactivates the SLS2 function.
Version 1 Activates version 1 of the SLS2 function.
200.32 SLS2 limit negative Sets the SLS2 negative speed limit for the
drive.
0.0 rpm
-35880.0 …0.0 rpm Speed
200.33 SLS2 limit positive Sets the SLS2 positive speed limit for the
drive.
0.0 rpm
0.0…35880.0 rpm Speed
200.41 SLS3 activity and
version
Activates or deactivates the SLS3 function
and shows the version of the SLS3 function.
Disabled
Disabled Deactivates the SLS3 function.
Version 1 Activates version 1 of the SLS3 function.
200.42 SLS3 limit negative Sets the SLS3 negative speed limit for the
drive.
0.0 rpm