ABB FSO-21 - Page 403

Parameters 403
-35880.0 …0.0 rpm Speed
200.43 SLS3 limit positive Sets the SLS3 positive speed limit for the
drive
0.0 rpm
0.0…35880.0 rpm Speed
200.51 SLS4 activity and
version
Activates or deactivates the SLS4 function
and shows the version of the SLS4 function.
Disabled
Disabled Deactivates the SLS4 function.
Version 1 Activates version 1 of the SLS4 function.
200.52 SLS4 limit negative Sets the SLS4 negative speed limit for the
drive.
Note: Variable SLS uses this limit as scaled.
See Defining the scaled SLS4 limit and
SLS4 trip limits on page 370.
0.0 rpm
-35880.0 …0.0 rpm Speed
200.53 SLS4 limit positive Sets the SLS4 positive speed limit for the
drive.
Note: Variable SLS uses this limit as scaled.
See Defining the scaled SLS4 limit and
SLS4 trip limits on page 370.
0.0 rpm
0.0…35880.0 rpm Speed
200.61 SLS variable activity
and version
Activates or deactivates the Variable SLS
function and shows the version of the
Variable SLS function.
Note: This function can be activated only
when the safety fieldbus is installed.
Disabled
Disabled Deactivates the Variable SLS function.
Version 1 Activates version 1 of the Variable SLS
function.
200.71 SMS activity and
version
Activates or deactivates the SMS function
and shows the version of the SMS function.
Disabled
Disabled Deactivates the SMS function.
Version 1 Activates version 1 of the SMS function. See
section SMS function, version 1 on
page 178.
Version 2 Activates version 2 of the SMS function. See
section SMS function, version 2 on
page 179.
200.72 SMS limit negative Sets the negative speed limit for the SMS
function.
Note: This parameter is used only in version
2 of the SMS function.
0.0 rpm
-35880.0 …0.0 rpm Speed
Index Name/Value Description Factory
default