Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
14 Taking out of operation at short notice / 14.2 Installing the replace-
ment turbocharger
© Copyright 2018 ABB. All rights reserved. HZTL4032_EN Revision H July 2018
14.2 Installing the replacement turbocharger
To enable you to quickly put an engine back into operation after a turbocharger has sus-
tained damage, ABB Turbo Systems recommends having a replacement turbocharger or ap-
propriate spare parts available in storage. The defective turbocharger can be removed and
the replacement turbocharger installed within a short period of time.
u Remove defective turbocharger (see chapter Removing and Installing →10).
u Install replacement turbocharger (see chapter Removing and Installing →10).
u Send the defective turbocharger to an ABB Turbocharging Service Station for inspection
and repair.
14.3 Installing the replacement cartridge group
14.4 Fitting the cover plate
u Remove turbocharger (see chapter Removing and Installing →10).
¡ Gas outlet casing removed
u Fit the turbine casing with the gas outlet casing into the gas pipe again.
u Attach the cover plate (see following section).
¡ Gas outlet casing not removed
u Fit the turbine casing into the gas pipe and on the gas outlet casing again.
u Attach the cover plate (see following section).
Page 144 / 161
To Next Page
Loading...