ABB IRB 2600 - Page 154

Valid for serial numbers up to -100999 and -500999
A
B
C
xx1000000669
Oil draining plug gearbox 1A
Oil filling plug for gearbox 1B
Surface for motor flangeC
Note
Use correct oil plugs for filling and draining depending on which position the
robot is mounted:
Floor mounted:
• Draining = Oil plug on gearbox.
• Filling = Oil plug on surface for motor flange.
Mounted in suspended position:
• Draining and filling = Oil plug on surface for motor flange.
Required equipment
NoteEquipment
3HAC029646-001Oil plug sealing washer, gearbox
See section Type of lubrication in gearboxes
on page 151.
Lubricating oil
Continues on next page
154 Product manual - IRB 2600
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
3 Maintenance
3.4.2 Changing the oil, axis 1 gearbox on floor mounted robots
Continued