NoteAction
How to inspect the oil level is described
in section:
• Inspecting the oil level, axis 2
gearbox on page 128
Inspect the oil level.6
Tightening torque:
• 24 Nm
Refit oil plug.
Note
Before refitting the oil plug in the gearbox,
always replace the oil plug sealing washer
with a new one. If not there is a risk of
leakage.
7
Product manual - IRB 2600 167
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
3 Maintenance
3.4.4 Changing the oil, axis-2 gearbox
Continued
To Next Page
Loading...
