NoteAction
See the figure in Location of SMB
battery on page 181.
Put the battery unit into its recess while arranging
the SMB cables as shown in the figure.
4
See the figure in Location of SMB
battery on page 181.
Secure the SMB cover with its attachment screws.5
Detailed in Updating revolution
counters on page 368.
Update the revolution counter.6
DANGER
Make sure all safety requirements are met when
performing the first test run. These are further de-
tailed in the section DANGER - First test run may
cause injury or damage! on page 50.
7
184 Product manual - IRB 2600
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
3 Maintenance
3.4.8 Replacing SMB battery
Continued
To Next Page
Loading...
